FAQ

How should I remove stubborn or dried spills?

Use a damp, soft cloth with warm water and soap. If needed, apply common, non-abrasive, household cleaners such as Soft Scrub Liquid Gel with Bleach, or Comet Soft Cleanser Cream directly on a damp cloth or sponge and wipe the surface, rinsing thoroughly after cleaning. To avoid dulling the surface’s shine, make sure to use a non-abrasive cleaner, and rinse off any cleaner with water. To remove adhered material such as food, gum, or nail polish, first scrape away the excess material with a plastic putty knife and then clean the surface with a damp cloth to remove any marks left behind and any residual dirt.

How durable is quartz stone?

Quartz stone is resistant to cracks, scratches and stains. However, like most materials, excessive force and/or pressure from objects can damage the surface.

Quartz stone is resistant to most stains caused by fruit juices, liquid food coloring, coffee, tea, wine, grapes and soft drinks.

Quartz stone’s non-porous nature provides maximum resistance to staining and fully eliminates the need for any sealing. The non-porous quality of the surface also greatly reduces the potential for bacterial growth.

Can I cut on my quartz stone countertop?

Its surfaces are highly scratch resistant; however, avoid using sharp objects such as sharp knives or screwdrivers directly on the surface. The use of a cutting board is always recommended.

How do I maintain quartz stone’s natural beauty?

Polished: Due to its high density and non-porous qualities, normal cleaning with a damp cloth and mild detergent will keep your Caesarstone surface looking like the first day it was installed. To avoid dulling the surface’s shine, make sure to use a non-abrasive cleaner, and thoroughly rinse off with water after use. We recommend a thorough cleaning of your Caesarstone surface on a regular basis (because of the patina that can develop on the surface from day from cooking, grease oils in the air) to keep the surface as beautiful as the day it was installed.

Honed: Please understand that HONED, TEXTURED and MOTIVO finishes will require more daily maintenance than our polished finishes. Since there is more exposed surface area with honed finishes, metal marks, finger prints and other signs of daily living will show on honed material. Most of these marks can be easily removed with little effort and non-abrasive cleaning products such as Soft Scrub Liquid Gel.

How does quartz stone withstand heat?

Quartz stone is structurally more heat resistant in comparison to other stones, including granite. However, any stone material can potentially be damaged by sudden and rapid temperature changes, especially near the edges. Therefore, using inexpensive and readily available hot pads or trivets is always recommended, especially when using cooking units such as electric frying pans, crock pots, or roaster ovens. We do not advise putting hot cookware directly on the Caesarstone surface.

Are there any chemicals or cleaners to avoid using?

We recommend using cleaning products between pH 5-8, as products outside this range may damage the surface. Avoid exposing to chemicals with pH levels outside this range, such as oven grill cleaners, floor strippers, toilet bowl cleaners, oil soaps, tarnish removers, furniture cleaners, drain products, etc. Should your surface accidentally be exposed to any potentially damaging products, rinse immediately with water to neutralize the effect.